Diamond HMI News

The Snaptron DT Series Dual Action dome detects two different user force levels: The first position - no tactile sensation in the membrane Switch but makes electrical contact. The second position - makes a second electrical contact— Membrane Keyboard gives the tactile feedback synonymous with traditional domes switches.

The WF101JSYFHLHBV comes with a resolution of 1024x600 pixels. It has a PCB board featuring an HDMI connector that supports an HDMI signal (only for DVI) Interface and has a 40-pin GPIO connector designed to make Raspberry Pi usage easy. The backlight has four studs, and the PCB adopted the locking method attached to the module. The model adopted an IPS panel with a wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degrees.

The Snaptron DT Series Dual Action dome detects two different user force levels: The first position - no tactile sensation in the membrane Switch but makes electrical contact. The second position - makes a second electrical contact— Membrane Keyboard gives the tactile feedback synonymous with traditional domes switches.

WF22GN5AB2DNN0 is a 2.13-inch Portrait Mode Mono TFT Display with an LPRD (Low Power Reflective LCD) resolution of 122x250 pixels, built-in ST7306 driver IC that supports 8-bit MCU, 4-line SPI/3-line SPI interfaces.

WF0200BTYAJDNG10 is a 2-inch Portrait Mode IPS TFT-LCD display with a projected capacitive touch panel (PCAP) resolution of 240x320 pixels.

Winstar's latest 5.7 inch TFT Display module includes a PCAP touch screen, and built in PIC24 controller. This latest addition to Winstar's "Clever System"- All in One series of displays, offer designers a simplified route to create attractive and intuitive user interfaces.

We are pleased to announce that our new ecommerce site for our ioniTOUCH™ range of antimicrobial keyboards is now live.

3.5" TFT Display with PCAP Touch screen and CAN Bus interface is ideal for aftermarket automotive and commercial vehicle applications.

Dailywell's latest 19mm and 22mm Latching Piezo switch behaves like mechanical switches with the advantages of an exceptionally rugged construction. 

WF101JSYAHMNB0 is a 10.1 inch MIPI DSI interface with high brightness 1024 x 600 IPS TFT-LCD module with projected capacitive touch panel (PCAP).

WEO064128A model is ideal for wearable, and portable devices.

Update on Silicone Rubber price increases from our suppliers, find out more.

WEO012864AA OLED display is based on a chip-on-glass technology; only 1.41 mm in depth, lightweight, low power, and very thin.

Visit us at stand H67 at The Engineering Design Show in Coventry on the 19th-20th October 2021. Book your FREE ticket here.

Download our updated silicone rubber design guide.

The WUAB series TFT's are based on the NXP i.MX6 embedded System-on-chip (SoC) which features a scalable multi-core ARM Cortex™ A9 processor.